Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Peugeot Bipper Tepee

Model: Peugeot Bipper Tepee MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

Video tutorial

Today we will explain how to reset the service light on a Peugeot Bipper Tepee in less than two minutes. To reset the light, press the brake pedal while starting the car's instrument panel.

Press the brake pedal 7 times in a row and then hold it down for 60 seconds. After 60 seconds, the service light on the instrument panel will turn off and in the settings menu you will be able to see the kilometers until the next service.

Before checking the kilometers until the next service, restart the instrument panel to complete the reset procedure.


Posted on 4 August 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Peugeot Bipper?
How to Reset the Service Light on the Peugeot Bipper?
Peugeot Bipper Tepee (2007-2016 / MK 1) To completely clear the Service light from the instrument cluster of the Peugeot Bipper, you need to remove the panel located at the bottom left of t…
How do you reset the Service light of the Peugeot Bipper?
How do you reset the Service light of the Peugeot Bipper?
Peugeot Bipper Tepee (2007-2016 / MK 1) In order to reset the Service light of the Peugeot Bipper, you need to loosen the screws that secure the panel located immediately below the steering…
Resetting Service Light on Peugeot Bipper
Resetting Service Light on Peugeot Bipper
Peugeot Bipper Tepee (2007-2016 / MK 1) Do you want to reset the service light on a Peugeot Bipper? Here's how to reset the maintenance light. Enter the vehicle, turn on the ignition (you w…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos