|
Do it yourself
| |||
| ||||
How to repair the Peugeot 3008 fan that is not working
Model: Peugeot 3008
MK 2, P84
- Years 2016-2023
In this video, we will see how to behave when the cabin fan of our Peugeot 3008 is not working: the most common causes are the speed regulator or a faulty electrical contact. We can access the regulator without removing the glove compartment, by lying on the passenger side and removing the lower cover under the dashboard: this way we can see the regulator. For greater accessibility, however, it is better to remove the glove compartment. Check the wiring, by setting the fan to maximum speed and gently moving the connector cables of the regulator to see if the fan restarts (if so, it is a false contact); check that the connector pins are not oxidized or damaged. Replace the speed regulator by disconnecting the electrical connector, removing the two torx screws that secure the regulator, installing the new one and reconnecting the connector. The functionality test consists of the fan working at all speeds.
Posted on 16 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 3008
(2009-2016 /
T84, MK 1)
Today's information will show you the procedure for removing and replacing the cabin fan on a Peugeot 3008. First, get into the vehicle on the front …
Peugeot 3008
(2009-2016 /
T84, MK 1)
To replace the cooling fan on the Peugeot 3008, access the lower part of the engine bay, where there is a protective panel that must be removed by un…
Peugeot 3008
(2009-2016 /
T84, MK 1)
This tutorial shows how to replace the cabin fan on the Peugeot 3008, a very simple and quick task. First, ensure the key is not inserted, then go to…
Other guides you may be interested in
|
How to Remove the Front Bumper of the Citroën C4 Picasso?
To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.076
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |