Do it yourself
Frequently asked questions about cars and motorcycles

How to install and remove the rear seats of the Peugeot Rifter

Model: Peugeot Rifter MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Seat

Video tutorial

Today we will see the instructions that will allow us to install and remove the rear seats of the Peugeot Rifter. First, we open the rear door of the trunk and begin to lower the backrest of the front seat; then we proceed to release the seat at the bottom, rotating it until it is completely removed from the guide, as shown in the video.

In the same way, we will also remove the other rear seats, increasing the cargo volume of the trunk; then the installation of the third row of rear seats is illustrated, restoring the original position of the seats afterwards.


Posted on 11 September 2025 by ScegliAuto


Related tutorials

Peugeot Rifter (2018-2026 / MK 1) The spare wheel on the Peugeot Rifter is located at the bottom of the vehicle's floor: to access it, open the rear tailgate to reach the loading area…
Peugeot Rifter (2018-2026 / MK 1) In this tutorial, you will learn how to remove the spare wheel in a Peugeot Rifter van, a simple operation so you can use it in case of emergency or …
Peugeot Rifter (2018-2026 / MK 1) On the Peugeot Rifter van, the tailgate may become stuck, for example, due to a problem with the control button or the lock actuator. In these cases,…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos