Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Rifter
    4. : How to remove the spare wheel in a Peugeot Rifter van?

Peugeot Rifter - Video tutorial

Model: Peugeot Rifter MK 1 - Years 2018-2024
Part: Wheel
Operation: How to remove the spare wheel in a Peugeot Rifter van?

In this tutorial, we can see how to remove the spare wheel in the Peugeot Rifter van, a very simple operation, so that we can use it in case of an emergency or replace it. First of all, make sure that the handbrake is properly engaged, then retrieve the tools located under both front seats, open the rear door, and locate the hole on the edge of the compartment. Next, insert the large key into it and unscrew the bolt until the wheel support is completely released. To put it back in place, simply screw the bolt back in.


Posted on 13 July 2023 by ScegliAuto

Other guides that may interest you

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos