Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Service warning light

When we need to reset the service light on a Peugeot Partner vehicle, we can use the same manual as the Citroën Berlingo and vice versa because the steps are the same. To perform the reset operations on these two types of vehicles, it is necessary to get into the vehicle and turn on the instrument panel, inserting the key into the ignition switch; immediately after, press the button with the symbol of the wrench on the instrument panel to start the countdown. Once the countdown is complete, the light will be completely reset and the kilometers to the next car service updated; if the light can reappear on both vehicles, it will be necessary to check the operation of the oil tank sensors.

Posted on 12 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2014 Peugeot Partner
How to reset the service light on the 2014 Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) If you have a 2014 Peugeot Partner and are wondering how to perform the manual reset procedure for the service light, then all you need to do is foll…
How to restore the service warning light on the Peugeot Partner
How to restore the service warning light on the Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) In this short video, the procedure for resetting the service light on the 2015 Peugeot Partner is illustrated. The procedure only takes a few seconds…
How to reset the "Service" light on a Peugeot Partner?
How to reset the "Service" light on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To reset the "Service" light on a Peugeot Partner, turn on the instrument panel without starting the engine by turning the key in the ignition to the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos