|
Do it yourself
| |||
| ||||
How to replace the steering head of the Peugeot 308 MK2
Model: Peugeot 308
T9, MK 2
- Years 2013-2021
In this video, we will see how to replace the steering head of the Peugeot 308 MK2. We need to lift the car at its front and remove the wheels, so we can see the steering head, and we will have to clean the fixing elements with a metal brush and WD-40. With a marker, we make a mark between the tie rod and the steering head, so we can put it back in the same place. We disassemble the steering head, unlock it from the other side and then unscrew it, counting the number of turns needed to remove it from the threading. We will need this to put the new one back in its place. We measure the distance between the lock nut and the tie rod with a caliper, so we can reassemble the lock nut at the same distance. We reassemble the lock nut, take the steering head and make the same number of turns that were necessary to disassemble it, then reassemble the steering head on the pin, tightening it to 60 Nm, and the lock nut on the other side to 67 Nm. We can reassemble the wheel.
Posted on 12 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 308
(2013-2021 /
T9, MK 2)
Let's see how to replace the rear wiper blade on a Peugeot 308: as our YouTuber rightly advises, before purchasing a new blade, measure the one to be…
Peugeot 308
(2013-2021 /
T9, MK 2)
In this video we can see how to easily adjust the headlights height of our Peugeot 308 MK2: unlike many other cars, where this operation must be done…
Peugeot 308
(2013-2021 /
T9, MK 2)
Before you start, sit in the driver's seat of your Peugeot 308. Press and hold the button located in the bottom right corner of the instrument panel,…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.111
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |