Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the cabin fan of the Peugeot 107.

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

Video tutorial

In this guide, we will go through the main steps on how to disassemble and replace the cabin fan motor of the Peugeot 107. First, we get inside the vehicle and start by removing the plastic side cover located at the bottom on the driver's side; then we proceed to unscrew the screws securing the cabin fan and disconnect the electrical connector, as shown in the video.

At this point, we perform the repair or replacement of the cabin fan, reassembling it correctly; all that's left is to check its operation at various speeds.


Posted on 6 January 2026 by ScegliAuto


Related tutorials

How to Dismantle the Heating Fan Motor on a Peugeot 107?
How to Dismantle the Heating Fan Motor on a Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) To replace the heating fan motor on a Peugeot 107, you practically need to dismantle the entire dashboard, removing the relevant fixing screws, pryin…
Where is the fuse box located in the cabin of the Peugeot 107?
Where is the fuse box located in the cabin of the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) If you are looking for the box containing all the various fuses of the interior of your Peugeot 107, then all you have to do is carefully read the fo…
Where are the fuses located in the Peugeot 107?
Where are the fuses located in the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) In the Peugeot 107, you can find two boxes that contain the fuses: the first is located inside the cabin, in the part of the dashboard that is to the…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos