Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Where are the fuses located in the Peugeot 107?

Peugeot 107 - Video tutorial

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Fuse box
Operation: Where are the fuses located in the Peugeot 107?

On the Peugeot 107, it is possible to locate two boxes that are used for containing fuses: the first one is positioned inside the passenger compartment, in the dashboard area on the sides of the instrument panel. In this box, you will be able to find fuses that control the interior lights, ABS, horn, etc. The second box is located on the top right side of the engine compartment, just below the windshield. Inside this box, you will be able to locate fuses that regulate the operation of the windshield wipers, instrument panel, etc.


Posted on 8 September 2023 by ScegliAuto

    Frequently Asked Questions

    • 107 2005-2014 - Where is the horn fuse located on the Peugeot 107? Read Answer
    • 107 2005-2014 - Where is the fuse for the turn signals of the 107 located? Read Answer
    • 107 2005-2014 - Where are the fuse boxes located on the Peugeot 107? Read Answer
    • 107 2005-2014 - Where is the fuse box located, in the Peugeot 107? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos