Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Where are the fuses located in the Peugeot 107?

Peugeot 107 - Video tutorial

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Fuse box
Operation: Where are the fuses located in the Peugeot 107?

The fuses of the Peugeot 107 are contained within two fuse boxes that are installed on the vehicle: in this car model, one can be found inside the passenger compartment and one inside the engine compartment. The first one can be located by removing the cover above the tachometer: it contains the fuses that are responsible for the functioning of the rear lights, power windows, windshield wipers, etc. The second fuse box is located on the right side of the engine compartment and contains the fuses for the low beam headlights, ABS, horn, etc.


Posted on 18 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 107 2005-2014 - Where is the horn fuse located on the Peugeot 107? Read Answer
    • 107 2005-2014 - Where is the fuse for the turn signals of the 107 located? Read Answer
    • 107 2005-2014 - Where are the fuse boxes located on the Peugeot 107? Read Answer
    • 107 2005-2014 - Where is the fuse box located, in the Peugeot 107? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos