Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Heating Fan Motor on a Peugeot 107?

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

Video tutorial

To replace the heating fan motor on a Peugeot 107, you practically need to dismantle the entire dashboard, removing the relevant fixing screws, prying with a screwdriver where necessary, and being careful with the electronic components. The heating fan motor is located in the centre of the dashboard: to remove it from its housing, you must first remove the immobiliser by disconnecting the relevant connector.

You can then remove the fan motor and replace it with the new part. Finally, reassemble all the parts that were previously removed.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Disassembly of the cabin fan of the Peugeot 107.
Disassembly of the cabin fan of the Peugeot 107.
Peugeot 107 (2005-2014 / MK 1) In this guide, we will go through the main steps on how to disassemble and replace the cabin fan motor of the Peugeot 107. First, we get inside the v…
How to remove the gearbox casing on the Peugeot 107
How to remove the gearbox casing on the Peugeot 107
Peugeot 107 (2005-2014 / MK 1) In today's video, you will see the main instructions for removing the gearbox casing on the Peugeot 107. First, open the bonnet and start by removing…
How to replace the air filter of the Peugeot 107
Peugeot 107 (2005-2014 / MK 1) If you want to replace the engine air filter of your Peugeot 107 on your own, just pay attention to the various steps described in the following guid…

    Frequently Asked Questions

    • 107 2005-2014 - Where is the inertia switch on the Peugeot 107? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos