Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gearbox casing on the Peugeot 107

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Transmission

Video tutorial

In today's video, you will see the main instructions for removing the gearbox casing on the Peugeot 107. First, open the bonnet and start by removing the battery and battery tray, disconnecting the connectors and unscrewing the bracket screws; then disconnect the gear selector cable, as shown in the video.

At this point, remove the radiator along with the fan, and subsequently remove the oxygen sensor (lambda probe); then proceed to remove the gearbox casing by draining the oil and unscrewing the screws, following the video to the end!


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How do you replace the clutch on a Peugeot 107?
How do you replace the clutch on a Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) The replacement of the clutch installed on the Peugeot 107 can be carried out by lifting the vehicle using a jack or a lift: once the car is raised, …
How to Replace the Clutch on a Peugeot 107?
How to Replace the Clutch on a Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) To replace the clutch on a Peugeot 107, first lift the car to access the bolts securing the front right wheel. Once the wheel is removed, you can acc…
How do you replace the clutch of the Peugeot 107?
How do you replace the clutch of the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) The clutch of the Peugeot 107 can be replaced by lifting the car, so that it is possible to proceed by unscrewing the screws that fix the front right…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos