Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

PARROT Hands-Free Kit Installation

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Accessory kit

To install the PARROT hands-free kit, you need to remove the original stereo: insert the appropriate keys into the corresponding holes and extract the car radio and CD changer, disconnecting the connectors attached to them. Remove the cover of the gear lever, extract the ashtray, and dismantle the covers of the central console. Connect the wiring supplied with the kit to the original connectors, making a notch in the frame for the microphone wire, which is suggested to be installed above the hazard switch; reassemble the frame. Then connect the control unit of the hands-free system and the car radio with the corresponding wiring, including the CD changer. Secure the display just above the car radio and run the cable to connect the phone through the glove compartment. Finally, attach the controls to the steering wheel.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Aftermarket Xenon Headlight Kit
Installation of Aftermarket Xenon Headlight Kit
Peugeot 307 (2001-2009 / MK 1) Improving night visibility is always advisable, so obtain the necessary modification kit and proceed as follows. Open the package of the new bulb, re…
How to Replace the Cooling Fan Kit on a Peugeot 307
How to Replace the Cooling Fan Kit on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video, you will learn how to remove the engine cooling fan kit from a Peugeot 307. Open the bonnet and secure it, then detach the plastic riv…
How to Replace the Gear Knob on the Peugeot 307
How to Replace the Gear Knob on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video, you will see how to change the gear knob on a Peugeot 307: first, remove the plastic trims from the centre console around the knob and…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos