Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the BSI of the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Control unit

In this video we can see how to reset, update, and prepare a Peugeot BSI: in fact, we cannot simply take a used BSI and install it on another Peugeot, expecting it to work. In the video, the operator reads the content of the BSI's Eprom memory using a hardware program (CH341A), in order to extract the security code necessary for some operations; then decides to completely erase the content of the memory, filling it with the hexadecimal value FF; then, using the diagnostic software DiagBox, performs a download to the empty BSI, assigning the car's chassis number on which it will be installed, then resets all parameters and factory values. It is not a procedure for everyone: it requires specific equipment, subscription to the PSA online service, and advanced specific skills. The risk of damaging the BSI with incorrect procedures is very high, and the video specifies that pirate tools are not able to perform it.

Posted on 22 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to restore the BSI module of the Peugeot 307
How to restore the BSI module of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this short and simple guide, we will see how to reset the BSI module of the Peugeot 307, but also on most models of the manufacturer. The BSI modu…
How to Program the BSI of the Peugeot 307
How to Program the BSI of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Follow the instructions below to reconfigure the BSI of the Peugeot 307, as well as most models from the Peugeot - Citroen group. First, remove the B…
How do you reset the BSI unit of the Peugeot 307?
How do you reset the BSI unit of the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In order to reset the BSI control unit on the Peugeot 307, you need to connect a diagnostic tool to the OBD port of the vehicle, located on the dashb…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos