Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to use the jacks on Peugeot 307

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Wheel
Operation: How to use the jacks on Peugeot 307

Let's see how to use the wheel removal kit on Peugeot 308. We open the trunk and take the wheel removal kit which includes: jack, jack lever, screwdriver, bolt wrench, telescopic wrench, spare wheel. We position the jack under the grip point of the car, that is under the most rigid part of the frame in order to bend the sheet metal due to the too much weight, lift the car a little and loosen the wheel pins. We lift the car with the jack lever, unscrew the pins and pull the wheel away from the hub seat. We mount the new rim on the hub. Always remember to store the assembly kit with all its parts in the luggage compartment.


Posted on 4 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 307 2001-2009 - Can the winch of the spare wheel on the Peugeot 307 SW be repaired? Read Answer
    • 307 2001-2009 - Where is the spare wheel of the Peugeot 307? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos