Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Wheel on Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Wheel

To replace the wheel on a Peugeot 307, first open the boot and retrieve the wheel removal kit, which includes: jack, jack lever, screwdriver, wheel nut wrench (if available), telescopic wrench, and spare wheel. Position the jack under the jacking point of the vehicle (under the most rigid part of the chassis), lift the car slightly, and loosen the wheel nuts. Raise the car with the jack lever, unscrew the nuts, and pull the wheel off the hub. Fit the spare wheel onto the hub with the respective nuts and lower the car back to the ground. Finally, return the wheel removal kit to the boot.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 307 (2001-2009 / MK 1) In today's tutorial video, discover how to extract the spare wheel from its compartment in the Peugeot 307 SW. First, open the boot's rear hatch and …
Peugeot 307 (2001-2009 / MK 1) Below are the main steps to remove and replace the wheel with the spare on the Peugeot 307. First, loosen the wheel bolts using the appropriate wrenc…
Peugeot 307 (2001-2009 / MK 1) To replace the CV joint on the Peugeot 307, first loosen the bolts that secure the wheel corresponding to the joint to be removed. Once the wheel is …

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos