|
Do it yourself
| |||
| ||||
How to Replace the Indicator Stalk of the Peugeot 307
Model: Peugeot 307
MK 1
- Years 2001-2009
Let's see how to replace the indicator stalk of the Peugeot 307: disconnect the battery, and remove the airbag by inserting a flat screwdriver behind the steering wheel, then push inward to unlock the spring. Disconnect the airbag and horn connectors, lock the steering to prevent it from turning, unscrew the central screw with a Torx 50, and mark the position of the steering wheel relative to the column with a marker. Remove the plastic cover by taking out the screws, disconnect the electrical connectors from the indicator stalk (take a photo first to remember the various positions), then unscrew the securing nut and unlock the tabs. You can find the complete assembly on auto-doc.it with the EAN code 5902048133632 for £69.99 plus £9.95 for delivery. If the new stalk does not have the buttons for steering control, remove them from the old one and refit them onto the new one; slot the component into the column, tighten the nut, reconnect the electrical connectors, refit the plastic covers, then the steering wheel, the central screw, reconnect all connectors, and finally the airbag module and the battery.
Posted on 10 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 307
(2001-2009 /
MK 1)
This guide provides instructions for removing and replacing the light and wiper switches in a Peugeot 307. First, open the bonnet of your car and dis…
Peugeot 307
(2001-2009 /
MK 1)
In this mini guide, you will discover how to replace the side indicator bulb on your Peugeot 307. First, park the vehicle safely and remember to turn…
Peugeot 307
(2001-2009 /
MK 1)
Insert a flat screwdriver into the two side holes located behind the steering wheel and wiggle it slightly to release the outer part of the steering …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.106
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |