Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in a Peugeot Expert

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

To reset the service light in a Peugeot Expert, turn off the ignition and press the trip meter reset button. Keep it pressed and, at the same time, turn the ignition on without starting the engine.

A countdown will appear on the display. Continue to hold the button until the countdown ends and wait for "=0" to be displayed.

At this point, release the button and turn off the ignition. Restart the vehicle and check that the maintenance light is no longer present on the instrument cluster.

The reset must be performed after completing the scheduled maintenance to maintain the correct interval for the next service.


Posted on 25 September 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure warning light on the Peugeot Expert?
How do you reset the tire pressure warning light on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) To reset the tire pressure warning light of the Peugeot Expert, you need to inflate the tires to the corresponding pressure value: this value is indi…
How to Reset the Service Light on a Peugeot Expert
How to Reset the Service Light on a Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) In today's video guide, you will learn how to reset the service light on a third-generation Peugeot Expert, produced from 2016 to present. First, tur…
How to reset the AdBlue warning light on the Peugeot Expert?
How to reset the AdBlue warning light on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) To reset the AdBlue warning light on the Peugeot Expert, top up the tank with the necessary amount of additive fluid: locate the blue cap that seals …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos