|
Do it yourself
| |||
| ||||
How to change the stop bulb of the rear light on a Peugeot 5008
Model: Peugeot 5008
MK 1
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
To replace the stop bulb on the first generation Peugeot 5008, turn off the ignition and open the boot. Locate the two nuts that secure the rear light to the body and unscrew them with an appropriate tool. Next, pull the light unit outwards, freeing it from the positioning pin, and disconnect the electrical connector. By pressing the four locking tabs, extract the bulb holder. Then locate the stop bulb, type P21W 21 watts, and remove it by turning it a quarter turn. After inserting the replacement, reassemble the bulb holder and light unit, restoring the connections and fixings. Finally, press the brake pedal to check the light's operation.
Posted on 22 November 2026 by ScegliAuto
Related tutorials
Peugeot 5008
(2009-2016 /
MK 1)
To replace the rear headlamp bulb on a Peugeot 5008, open the tailgate to locate the panel next to the headlamp. Remove this panel from its housing b…
Peugeot 5008
(2009-2016 /
MK 1)
Want to replace the rear light bulbs on a Peugeot 5008 and don't know how? Follow these steps: open the rear tailgate of the boot; using a screwdrive…
Peugeot 5008
(2009-2016 /
MK 1)
To replace the rear light bulb of the Peugeot 5008, open the tailgate to access the protective panel located next to the light assembly: this panel m…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
How to Reset the Tyre Pressure Light on the Hyundai i20
These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |