Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Peugeot 207 low beam bulb replacement

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight bulb
Operation: Peugeot 207 low beam bulb replacement

In this video tutorial we will see how to remove and replace the low beam bulb of a Peugeot 207. First of all, let's open the car's bonnet, pulling the lever from the inside: then let's remove the plastic protection cap of the bulb that we find on the back of the headlight and let's disconnect the electrical connector; we unhook the iron clip and remove the old bulb, replacing it with the new one. After reassembling the bulb with H7 socket, we are going to reassemble everything, following the video tutorial to the end (the replacement of the arrow is also shown).


Posted on 23 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - How much does the Peugeot 207 low beam cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos