Do it yourself
Frequently asked questions about cars and motorcycles

Where is the OBD2 port located on the Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Checks and maintenance

To find the OBD2 port inside your Peugeot 207, all you have to do is carefully read and follow the steps described below. First, open the driver's side door and enter the vehicle, then proceed to remove the interior plastic panel located on the left side of the dashboard. At this point, you finally have access to the OBD2 port you were looking for and you are done. If necessary, you can connect any diagnostic tool compatible with your Peugeot 207 to the OBD2 port in question.

Posted on 17 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 207 (2006-2015 / MK 1) To locate the OBD port of your Peugeot 207, it only takes a few seconds. With the following guide, you will find it by following some simple steps. F…
Peugeot 207 (2006-2015 / MK 1) If you need to connect a diagnostic tool to your Peugeot 207 but do not know where the OBD port is located, do not worry because in the following gui…
Peugeot 207 (2006-2015 / MK 1) On Peugeot 207 vehicles, the diagnostic socket, better known as the OBD port, is located inside the cabin, specifically behind the dashboard on the d…

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos