Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : Where is the OBD port of the Peugeot 207 located?

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Operation: Where is the OBD port of the Peugeot 207 located?

On Peugeot 207 vehicles, there is a diagnostic socket known as the OBD socket which allows mechanics to diagnose and solve the car's problems much more quickly. On Peugeot 207 vehicles, the OBD socket is located inside the cabin, specifically behind the dashboard on the driver's side. To view the OBD socket, it is necessary to remove the dashboard by pulling with a slight force outward the piece of rigid plastic. Once the relevant part has been removed, we can see the socket, identifiable by its fluorescent green and black color, near the socket it is possible to notice one of the two fuse boxes of the car.


Posted on 5 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - Where is the rear windshield wiper fuse located in a Peugeot 207? Read Answer
    • 207 2006-2015 - Where is the crankshaft position sensor located on the Peugeot 207? Read Answer
    • 207 2006-2015 - What are the problems encountered on the Peugeot 207? Read Answer
    • 207 2006-2015 - Why does the Peugeot 207 horn not work? Read Answer
    • 207 2006-2015 - Why does the remote control of the key of a Peugeot 207 not work? Read Answer
    • 207 2006-2015 - What problem with the esp / asr on the Peugeot 207? Read Answer
    • 207 2006-2015 - Where is the Peugeot 207 oil pressure sensor located? Read Answer
    • 207 2006-2015 - What problems does the Peugeot 207 have? Read Answer
    • 207 2006-2015 - What problems on the Peugeot 207 lpg? Read Answer
    • 207 2006-2015 - Where is the chassis number of a Peugeot 207 located? Read Answer
    • 207 2006-2015 - Where is the Peugeot 207 horn located? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos