Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the front headlight bulb of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight bulb

Today's information will show us how to disassemble and replace the headlight bulb of the Peugeot 207. First, we open the car's hood and start removing the plastic cover protecting the bulbs; then we disconnect the electrical connector and release the metal clip to remove the low beam bulb, as shown in the video. At this point, we install the new bulb, of the correct type and with the same attachment; we connect it and finally reassemble the plastic cover, following the video until the end!

Posted on 13 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 207 (2006-2015 / MK 1) The replacement of the front bulb on the Peugeot 207 car follows simple steps. We start by opening the front hood and immediately remove the cap of t…
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlight bulb of your Peugeot 207, just a few simple steps are needed, which we will discover below. First …
Peugeot 207 (2006-2015 / MK 1) To replace the headlight bulb on the Peugeot 207, open the bonnet to access the rear of the headlight. Here, remove the circular protective cover to …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos