Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Car stereo

To remove the car radio, you need the appropriate extraction keys and a plastic trim tool. With the trim tool, unclip the plastic cover immediately below the ashtray; then unscrew the fixing screws of the plastic frame around the climate control buttons, extract the ashtray, and unclip the frame by pulling it forward. At this point, unclip the glove compartment located under the radio and, inserting the keys into the appropriate holes, unclip and extract the radio, disconnecting the plugs connected to it.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Car Radio from Peugeot 308
How to Remove the Car Radio from Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the car radio installed in a Peugeot 308? Let's look at removing the original car radio. Start by removing the ashtray located near…
Removing the Standard Radio from a Peugeot 308
Removing the Standard Radio from a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to remove and replace the standard radio from a Peugeot 308, following the instructions below. First, get …
How to Reset the Radio in a Peugeot 308
How to Reset the Radio in a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) This guide provides instructions to reset the radio in a Peugeot 308. There are two methods to reset the radio and the onboard computer; the first, m…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos