Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Removing the door panel on Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Door panel
Operation: Removing the door panel on Peugeot 207

Start disassembling the door panel by unscrewing the torx screws on the side strip, that is the one accessible only by opening the door (the torx are on both side strips). Then unscrew the torx present in the door drawer and remove it by levering it from underneath with a small flat screwdriver or a plastic wedge. In the same way, or by levering it, remove the stop that holds the window lifter knob and, subsequently, the knob itself. Once all this has been done, you can finally remove the panel: use a plastic lever to lever the entire surrounding slot and, working slowly, remove the panel from its seat and disconnect the cables.


Posted on 8 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos