Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to replace the exterior mirror on the Peugeot 307?

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Outside rearview mirror
Operation: How to replace the exterior mirror on the Peugeot 307?

In order to replace the external rearview mirror of the Peugeot 307 you have to remove the internal plastic cover, corresponding to the mirror. Subsequently, it will be necessary to loosen the bolts that secure the panel, remove the latter and unhook the connectors underneath. At this point, the screws located on the inside of the door in correspondence with the mirror must be loosened: this will allow the mirror and its connector to be removed from the outside. The new mirror can then be put in place, connected to the connectors and fixed with the relative bolts.


Posted on 5 March 2024 by ScegliAuto



Removing the Peugeot 307 exterior mirror
Peugeot 307 (2001-2009 / MK 1) Let's see in this video how to remove the exterior rearview mirror of a Peugeot 307, following these simple instructions. First we open the front doo
How to remove the mirror on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How to remove the mirror on Peugeot 307? Let's see in this video how to remove a passenger side exterior mirror. We disassemble to start the door pan
How to replace the exterior mirror in the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In this tutorial we can see how to replace the external rearview mirror in the Peugeot 307, a very simple and fast operation, which however requires

    Frequently Asked Questions

    • 307 2001-2009 - How to disassemble the Peugeot 307 mirror? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos