Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wing Mirror on Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Side mirror

How do you remove the wing mirror on a Peugeot 307? In this guide, remove the door panel along with the screws. Use a screwdriver to undo the securing screws around the plastic base of the mirror. Disconnect the power connector from the mirror. Remove the mirror with the power cables from the car door. For reassembly: refit the mirror with the power cables and the securing pins onto the plastic that is fixed to the door metal.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of External Wing Mirror on Peugeot 307
Disassembly of External Wing Mirror on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video, you will see how to disassemble the external wing mirror of a Peugeot 307 by following these simple instructions. First, open the fron…
How to Replace the External Wing Mirror on a Peugeot 307
How to Replace the External Wing Mirror on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the external wing mirror on a Peugeot 307, remove the internal plastic cover corresponding to the mirror. Next, loosen the bolts securing …
How to Repair and Replace the Glass on a Peugeot 307 Wing Mirror
How to Repair and Replace the Glass on a Peugeot 307 Wing Mirror
Peugeot 307 (2001-2009 / MK 1) Today's guide will show you how to repair and replace the glass on the external wing mirror of the Peugeot 307, following the instructions below. In …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos