Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to repair and replace the glass of the rearview mirror of the Peugeot 307.

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Outside rearview mirror
Operation: How to repair and replace the glass of the rearview mirror of the Peugeot 307.

Today's guide will show us how to repair and replace the glass of the external rearview mirror of the Peugeot 307, following the instructions below. In this case, we will be performing the replacement operation with the mirror removed from the car; so we lever on the side of the glass to detach and remove it, as shown in the video. At this point, we check that the mirror supports are in good condition (replace the entire rearview mirror if not); then we properly fix the glass, finally making the adjustment!


Posted on 1 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 307 2001-2009 - How to disassemble the Peugeot 307 mirror? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos