|
Do it yourself
| |||
| ||||
How to fix the trunk full of water in a Peugeot 307
Model: Peugeot 307
MK 1
- Years 2001-2009
Let's see how on this Peugeot 307, under the trunk cover and under the spare wheel, a large amount of water has accumulated. The first thing the YouTuber looked at were the seals around the tailgate, but they were fine, so he checked the rear lights, but even the seal of the lights was fine. Then the rear window? Nothing, not even that. The culprit was the seal of the trunk lock, and to change it we have to remove the plastic partitions inside the trunk, held in place by clips. Now comes the difficult part, because inside the plastic base there are clips that are difficult to reach, perhaps only with a mirror, and using a special spatula. The lock must then be removed from the wheel arch, there is no other method, and once the YouTuber has the component in hand, we see that the seal is actually destroyed. Changing the seal is not difficult, just one that we can get at any hardware store. The difficult part now will be to reposition the lock in its place, and we will have to follow the path we took to remove it, but in reverse. Then we put the partition back in place. In the meantime, we will have dried the compartment well so we can put back the spare wheel and the floor panel.
Posted on 30 March 2025 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 307
(2001-2009 /
MK 1)
In Peugeot 307 vehicles, the trunk can be opened in two ways. The first method of opening is to lift the lever located near the driver's front seat. …
Peugeot 307
(2001-2009 /
MK 1)
In this tutorial, you will see how to remove the third brake light on a Peugeot 307, a very simple and quick operation, for example, when replacing t…
Peugeot 307
(2001-2009 /
MK 1)
In this video, you will see how to open the stuck boot of a Peugeot 307, which has a faulty opening motor. This is a 307 Coupé Cabriolet, and it cann…
Other guides you may be interested in
|
Fuses Location and Diagram for the Volkswagen Crafter
In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.146
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |