Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Lock of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Trunk lock

This guide provides instructions on how to remove and replace the tailgate lock of the Peugeot 206. First, open the boot and start removing the plastic interior panel by unscrewing the screws and prying at the sides; then use a Torx screwdriver to unscrew the screws securing the lock, allowing you to remove it by disconnecting the metal cable. At this point, disconnect the electrical connector found at the back, replacing the lock with the new one, following the video to the end!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the lock and central locking system of the Peugeot 206.
Disassembly of the lock and central locking system of the Peugeot 206.
Peugeot 206 (1998-2012 / MK 1) Below we will see the main instructions that will allow us to disassemble and replace the lock and central locking of the Peugeot 206. First, we open…
How do you dismantle the pistons of the Peugeot 206 CC convertible top?
How do you dismantle the pistons of the Peugeot 206 CC convertible top?
Peugeot 206 (1998-2012 / MK 1) In order to disassemble the pistons of the convertible top of the Peugeot 206 CC, you need to pry with an object in order to detach the trim panel lo…
How to open the trunk of the Peugeot 206 in an emergency?
How to open the trunk of the Peugeot 206 in an emergency?
Peugeot 206 (1998-2012 / MK 1) When we are unable to open the trunk of the Peugeot 206, we must perform an emergency maneuver. To carry out this operation, we must recline the rear…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos