Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Peugeot 208 mk1

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Service warning light

To deactivate the service light on the Peugeot 208, first turn off the ignition by turning the key. Press and hold the reset button for the trip mileage for a few seconds. Then turn on the ignition and wait for the countdown on the display to reset while keeping the trip reset button pressed. Once this procedure is complete, the service light with the spanner icon will turn off, and the maintenance indicator on the display will show '=0'. To finish the procedure for resetting the service light, turn off the ignition again.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 208?
How to Reset the Service Light on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To reset the service light on a Peugeot 208, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, press and…
How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the "Service" light on a Peugeot 208, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to acc…
How to reset the "Service" indicator of a Peugeot 208?
How to reset the "Service" indicator of a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To reset the "Service" light on a Peugeot 208, turn on the instrument panel without starting the engine. Use the buttons located under the dashboard …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos