|
Do it yourself
| |||
| ||||
Replacing the Front Bulb on Peugeot 5008
Model: Peugeot 5008
MK 1
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
With the engine off and the handbrake engaged, lift the bonnet and secure it. Remove the round rubber cover at the rear of the bulb by simply pulling it off. Next, disconnect the rear connector of the bulb by pulling it as well. Extract the bulb along with its housing from the socket, then remove the bulb from the housing. Insert the new bulb you purchased, ensuring it is equivalent to the one removed, and pay attention to the orientation when proceeding with reassembly. Connect the connector and refit the cover.
Updated on 29 April 2026 by ScegliAuto
Related tutorials
Peugeot 5008
(2009-2016 /
MK 1)
The following instructions will allow you to remove and replace the dipped or main beam bulb of the front headlight on a Peugeot 5008. First, open th…
Peugeot 5008
(2009-2016 /
MK 1)
Here are the steps necessary to remove and replace the front headlamp bulb on the Peugeot 5008. First, open the bonnet of your car and start by remov…
Peugeot 5008
(2009-2016 /
MK 1)
Are the front headlight bulbs blown? Let's see how to replace the bulbs on a Peugeot 5008. Open the front bonnet by pulling the lever located at the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |