Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 4007
    4. : How to perform a service reset on Peugeot 4007

Peugeot 4007 - Video tutorial

Model: Peugeot 4007 MK 1 - Years 2007-2012
Part: -board computer
Operation: How to perform a service reset on Peugeot 4007

In this video tutorial we can see how the service reset is performed on a Peugeot 40007. Before performing the service reset on a Peugeot 4007, we must perform vehicle maintenance, such as changing the engine oil and filters; after performing the do-it-yourself service, get in the car, close all the car doors and put the handbrake, insert the key and turn to position one, now we see that the message "MAINTENANCE ORDINARY NECESSARY "; press the INFO button on the left of the dashboard until you find the wrench on the display; at this point, keep the INFO button pressed, when the display flashes, release the button and press two more times until the reset is complete.


Posted on 1 June 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos