Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 4007
    4. : How to replace engine oil on Peugeot 4007

Peugeot 4007 - Video tutorial

Model: Peugeot 4007 MK 1 - Years 2007-2012
Part: Engine oil
Operation: How to replace engine oil on Peugeot 4007

In this video tutorial we can see how it is possible to replace the engine oil on a Peugeot 4007 by following a few simple steps: the first thing to do is to buy new engine oil (check the type of oil in the use and maintenance booklet). necessary oil); next step we have to lift the bonnet and secure it with a special rod; lift the front of the car with a hydraulic jack and put safety jack stands. Remove the scratch guard under the vehicle. Once the scratch guard has been removed, we must place a container for the used oil under the oil pan; unscrew the drain oil plug and wait for all the oil to drain into the container. While we wait for all the oil to flow out, let's unscrew the oil filter. When all the oil has drained out, screw the oil drain plug back on. Replace the oil filter with a new one, and fit the new gasket. Screw the scratch guard back into place. Lower the car and top up with new engine oil.


Posted on 30 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos