Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Warning light – error code

The procedure to reset the service light on a Peugeot 206 is simple and quick. To reset the service light, insert the key into the ignition without turning it. At this point, press the reset button located at the bottom right of the speedometer and hold it down. While holding the reset button, turn on the ignition, and in the display where the car shows the total kilometres, a countdown will start from 10. Keep holding the reset button until the countdown finishes, then release the reset button, and the reset will be complete.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a 2002 Peugeot 206.
How to reset the service light on a 2002 Peugeot 206.
Peugeot 206 (1998-2012 / MK 1) When we need to reset the service light related to the maintenance, we must turn on the instrument panel of the Peugeot 206 and press the button loca…
How to Reset the Service Light on a Peugeot 206
How to Reset the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This brief guide explains how to reset the service light for routine maintenance on a Peugeot 206. First, get into the vehicle and press and hold the…
How to Reset the Service Light on a Peugeot 206?
How to Reset the Service Light on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To reset the Service light on a Peugeot 206, press and hold the button located on the right side of the dashboard while it is off. Continue holding t…

    Frequently Asked Questions

    • 206 1998-2012 - Why did the ABS warning light come on in the Peugeot 206? Read answer
    • 206 1998-2012 - How to fix the airbag fault warning light on Peugeot 206? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos