Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Headlamp of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight

As shown in the video, to replace the left headlamp of your Peugeot 207, open the bonnet and remove the front bumper and bodywork. Once the headlamp is free, start unscrewing the two bolts, one near the windscreen and the other above the headlamp, using a 10 mm T-key. You will also need to unscrew one bolt underneath the headlamp itself. After this, detach the headlamp from its housing using a flat screwdriver or a lever. Disconnect the connector, using the same lever to release the red pin. Once the electrical cables are disconnected, you can proceed to work on the headlamp itself.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Light Bulb on a Peugeot 207
How to Replace the Brake Light Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this article, learn how to replace the brake light bulb on a Peugeot 207. First, open the boot and locate the release pins. Press the pins to unlo…
How to Replace the Front Headlamp on a Peugeot 207
How to Replace the Front Headlamp on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How do you remove the front headlamp from a Peugeot 207? To remove the front headlamp, you first need to take off the front bumper. After unscrewing …
How to Remove the Rear Light of a Peugeot 207
How to Remove the Rear Light of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How do you remove the rear light of a Peugeot 207? It is a very simple operation. Follow this guide: open the boot lid, then remove the fabric cover …

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos