Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight bulb

Today's instructions will show us the process of disassembling and replacing the headlight bulb of the Peugeot 207. First, we open the hood of the car and start by removing the plastic cap that protects the bulbs; then we disconnect the electrical connector of the low beam bulb and release the metal clip to remove it from the headlight, as shown in the video. At this point, we install the new low beam or high beam bulb, of the correct type and with the same attachment; we insert it into the headlight assembly and check its operation!

Posted on 30 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Peugeot 207
How to Replace the Front Headlight Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the front headlight bulb on a Peugeot 207 is a very simple and quick task to do yourself. For the replacement, you will need an H7 bulb. Op…
How to replace the front headlight bulb of the Peugeot 207
How to replace the front headlight bulb of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) The replacement of the front bulb on the Peugeot 207 car follows simple steps. We start by opening the front hood and immediately remove the cap of t…
How to replace the front headlight bulb of the Peugeot 207
How to replace the front headlight bulb of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlight bulb of your Peugeot 207, just a few simple steps are needed, which we will discover below. First …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos