Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight

How do you remove the front headlamp from a Peugeot 207? To remove the front headlamp, you first need to take off the front bumper. After unscrewing all the securing screws, you can lift the bumper off the front of the car. Unscrew the securing screws to release the front headlamp from the front bar. Remove the front headlamp from its housing: disconnect the electrical connectors from the back of the headlamp. Connect the new headlamp to the electrical connectors or refit the headlamp after repairing it. Refit the front bumper after installing the headlamp: test the functionality of the front headlamp.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Fog Light of the Peugeot 207
Replace the Front Fog Light of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this tutorial, you will learn how to remove and replace the front fog light of the Peugeot 207 in simple and quick steps. First, remove the chrome…
How to replace the front headlight bulb of the Peugeot 207
How to replace the front headlight bulb of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlight bulb of your Peugeot 207, just a few simple steps are needed, which we will discover below. First …
How to replace the headlight bulb on the Peugeot 207?
How to replace the headlight bulb on the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the headlight bulb on the Peugeot 207, open the bonnet to access the rear of the headlight. Here, remove the circular protective cover to …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos