Do it yourself
| ||||
|
Peugeot 307 - Video tutorial
Model: Peugeot 307
MK 1
- Years 2001-2009 In this video tutorial we can see how to replace the front brake disc on a Peugeot 307 by following a few basic steps: the first thing to do is to lift the bonnet and secure it with a special rod; cover the mudguard with a cloth to prevent damage to the paint. Unscrew the brake fluid reservoir cap, loosen the wheel bolts, lift the car using a hydraulic jack and put safety jack stands under the vehicle; completely unscrew the bolts and remove the wheel from its seat. Remove the dust caps using a crowbar. Unscrew the brake caliper mount with a HEXN.H7 ratchet wrench; separate the brake pads with the crowbar and disconnect the brake caliper retaining spring. We can now remove the brake caliper and remove the brake pads. Clean the brake caliper holder fasteners. Unscrew the brake caliper bracket attachment with a Torx T 50 key. Remove the caliper bracket and unscrew the brake disc attachment with a Torx T 30; now it is possible to remove the brake disc from its seat and replace it with the new one.
Posted on 8 December 2022 by ScegliAuto
How to replace Peugeot 307 front brake pads
Peugeot 307 (2001-2009 / MK 1) To replace the brake pads and the front discs, lift the car, remove the front wheel, remove the caliper fixing pins and move it away from its support
Replacement of brake pads on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Do we want to replace the pads of the Peugeot 307? Let's see how the front brake pads are removed. We lift the car on a column bridge up to the desir
How to replace brake pads on a Peugeot 307 cc
Peugeot 307 (2001-2009 / MK 1) Today in this short video we are going to see how to replace the brake pads on our Peugeot 307 cc, with a little effort we will be able to do it ours Other guides that may interest you
|
How do you open the fuel flap of the Volkswagen Golf 5?In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.111
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |