Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Starter motor

To replace the starter motor on a Peugeot 206, open the bonnet to access the engine bay. The starter motor is located between the engine block and the battery, at the bottom of the bay. You will need to remove the exhaust pipe on the right side of the engine and also the battery. Once these are removed, the starter motor will be accessible. Extract it from the engine bay by unscrewing the fixing bolts and disconnecting the connectors attached to it. After removal, install the replacement part and refit all the components you removed.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor in the Peugeot 206?
How to Replace the Starter Motor in the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the starter motor in the Peugeot 206, lift the car with a ramp to access the underside of the engine bay and loosen the screws securing th…
How to Replace the Starter Motor on a Peugeot 206
How to Replace the Starter Motor on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In today's video tutorial, you will see the main instructions that will allow you to remove and replace the starter motor on a petrol Peugeot 206, as…
How to Replace the Starter Motor on a Peugeot 206 2.0 HDi?
How to Replace the Starter Motor on a Peugeot 206 2.0 HDi?
Peugeot 206 (1998-2012 / MK 1) To replace the starter motor on a Peugeot 206, open the bonnet to access the engine bay: the part is located between the engine block and the battery…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the starter motor located on the Peugeot 206? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos