Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the EGR valve located in the Peugeot 407?

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: EGR valve

In this video, you can see where the EGR valve is located in the Peugeot 407 and how to proceed if you need to remove it, for example, to clean or replace it. As shown, it is located at the rear left of the engine, and to access it, you will first need to remove the air filter box. Once this is done, you can disconnect both the indicated pipe and the intake manifold, disconnect the connector, and remove the valve from the engine wall. To fit the replacement, simply follow the reverse procedure.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Location of the fuse box and OBD port of the Peugeot 407
Location of the fuse box and OBD port of the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Inside the Peugeot 407 there are three fuse boxes. The first fuse box is located inside the engine compartment, near the battery. The second fuse box…
Where is the fuse box for the engine of the Peugeot 407 located?
Where is the fuse box for the engine of the Peugeot 407 located?
Peugeot 407 (2004-2012 / MK 1) To easily and safely locate the fuse box of the engine of your Peugeot 407, simply follow the steps described in the following guide. First, turn off…
Where Are the Fuses in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) The fuses in the Peugeot 407 are contained within the dedicated fuse boxes installed in the vehicle: this model has two boxes. The first is located i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos