Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Diagram for the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Fuse box

This brief tutorial video shows the exact location of the three fuse boxes in a first-generation Peugeot 208, produced from 2012 to 2019. The first two fuse boxes are located inside the vehicle's cabin; one is positioned above the glove compartment on the passenger side, while the second is situated under the dashboard to the left of the steering column. The third and final fuse box is found in the engine compartment on the right, as shown in the guide. This tutorial also includes all relevant fuse diagrams.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Location and Diagram for the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Today, we will look at the positioning and diagram of the fuse boxes for the Peugeot 208, following the instructions below. First, get inside the veh…
Diagram and Location of the External Fuse Box of the Peugeot 208
Diagram and Location of the External Fuse Box of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Today, we will discover the instructions that will allow you to access the external fuse box of the Peugeot 208, along with the diagram and layout. F…
What is the Fuse Diagram for the Peugeot 208?
What is the Fuse Diagram for the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) Your Peugeot 208 has two fuse boxes. The first is located under the steering column, covered by a plastic panel; removing it will reveal the primary …

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2012-2019 - Where is the Peugeot 208 fan fuse located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos