Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Light on a Peugeot 108

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tail light

Video tutorial

In this video tutorial, you can see how to replace the rear light on a Peugeot 108. The first step is to remove the rear light; refer to the vehicle's user manual to understand how to disassemble the light and replace the bulbs, which requires removing the entire unit.

First, unscrew the screw holding the plastic cover; the light is removed from the inside, as there are no screws on the outside.

Next, use a lever to remove the clip. Using a mirror, locate the nut that needs to be removed to take off the light.

Once you find the nut, use a 10mm socket to unscrew it. Be careful not to drop the nut inside and lose it. At this point, you can extract the light from the bodywork (use plastic levers to assist).


Updated on 9 July 2026 by ScegliAuto


Related tutorials

Peugeot 108 (2014-2021 / MK 1) These brief and simple steps will show us how to disassemble and replace the rear light and the bulbs of the third brake light on the Peugeot 108. Fi…
Peugeot 108 (2014-2021 / MK 1) The air conditioning pressure sensor, also known as a pressure switch, is a fundamental component in the air conditioning system of our Peugeot 108: …
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure warning light on the Peugeot 108, open the glove compartment located on the passenger side. Once opened, locate the button…

Where is the Starter Motor Fuse Located in the Renault Scenic?

In this video, you can see where the starter motor fuse is located in the Renault Megane, which is the first component to check in case of sudden malfunction. As shown, it is found in the fuse box within the engine compartment, to your right when facing the vehicle. To access it, first remove the plastic cover and then lift the fuse box. The fuse in question is located on the lower side, between the two connectors, and is rated at 25A. If faulty, ensure you use a replacement with the same specifications.

Watch the video!


by ScegliAuto

More videos