Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet on the Peugeot 108?

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Body

Video tutorial

In this tutorial, see how to open the bonnet on the Peugeot 108, a very simple operation that follows the standard procedure applicable to any other vehicle. First, wait for the engine to cool slightly, then open the driver's door, locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, insert your hand under the bonnet and grasp the second lever, pushing it to the left.

At this point, the bonnet will be free to lift and secure to the support rod.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from a Peugeot 108
How to Remove the Front Bumper from a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To remove the front bumper from a Peugeot 108, you need to remove the plastic clips located at the bottom of the bumper: once these are removed, you …
How to replace the air filter of the Peugeot 108
How to replace the air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To correctly replace the engine air filter of your Peugeot 108, it only takes a few minutes. All you have to do is carefully read the following guide…
How to replace the engine air filter of the Peugeot 108
How to replace the engine air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The replacement of the engine air filter of your Peugeot 108 is undoubtedly one of the simplest operations you can perform independently on the vehic…

    Frequently Asked Questions

    • 108 2014-2021 - How to open the hood in the Peugeot 108? Read answer
    • 108 2014-2021 - How to open the hood of the Peugeot 108? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos