Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 108
    4. : How do you remove the front bumper of the Peugeot 108?

Peugeot 108 - Video tutorial

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Front bumper
Operation: How do you remove the front bumper of the Peugeot 108?

To remove the front bumper of the Peugeot 108, you need to remove the plastic clips located at the bottom of the bumper. Once these have been removed, you can open the hood and detach the gasket located at the front of the engine block. Underneath it, you will find 10mm screws that must be completely removed. At this point, you can also remove the clips inside the wheel arch, completely detaching the bumper from its housing and replacing it with a new replacement piece.


Posted on 29 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos