Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the indicator light bulb

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Side turn signal light bulb
Operation: How to replace the indicator light bulb

The tools required in this video guide are only 2 and within everyone's reach, all you need is a flathead screwdriver and a bit of adhesive tape. First, tape is applied to the unpainted plastic part of the mirror above the taillight, to protect it from any scratches or marks that may occur. Insert the screwdriver in the space between the light and the applied tape and force it out slightly as shown in the video, at this point the light comes out, the power plug is disconnected again with the help of the screwdriver and we can proceed to replace the light bulb. Remember that once replaced it is always better to try to turn it on to test its operation. To reassemble the indicator light, simply re-fit it in the front and then in the rear.


Posted on 22 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos