Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up AdBlue on a Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: AdBlue warning light

To top up AdBlue on a Peugeot 2008, open the rear hatch to access the components inside the boot: here, you will need to remove the carpet that serves as flooring in the boot. Underneath, you will find the spare wheel, which can be removed from its housing by loosening the corresponding fixing nut: directly beneath the spare wheel, you will locate the cap for topping up AdBlue, which can be unscrewed to insert the necessary amount of fluid.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to top up the AdBlue fluid in the Peugeot 2008?
How to top up the AdBlue fluid in the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) If the AdBlue light has turned on in the instrument panel of our Peugeot 2008, it means that the liquid of the anti-pollution system has reached a to…
How to reset the AdBlue warning light in the Peugeot 2008?
How to reset the AdBlue warning light in the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) If the AdBlue warning light has turned on in the instrument panel of our Peugeot 2008, it means that the pollution control system liquid has reached …
Refilling AdBlue in the Peugeot 2008
Refilling AdBlue in the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this video tutorial, you can see how to refill AdBlue in a Peugeot 2008. First, you need to know that if the AdBlue warning light has come on in y…

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - Where is the AdBlue tank located on my Peugeot 2008? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos