Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2020 Peugeot 2008?

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Service warning light

As with most vehicles produced by this manufacturer, resetting the service light on the 2020 Peugeot 2008 is straightforward, even without using a computer with workshop software connected via the OBD port. As shown in the video, press and hold the button at the end of the left stalk and turn the key to switch on the ignition. The display will show an image of a spanner with a countdown underneath. Once this reaches zero and the spanner disappears, the procedure is complete. You can then release the button and turn off the ignition.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) How do you turn off the service light on a Peugeot 2008? Follow these steps to switch off the car's light. Turn on the instrument panel and check the…
How to Reset the Service Light on a Peugeot 2008
How to Reset the Service Light on a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) To reset the service light for the Peugeot 2008, first turn on the ignition and then press and hold the 0.0 button located on the right side of the d…
How to restore the service light of the Peugeot 2008
How to restore the service light of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) If you own a second series Peugeot 20088, specifically from the year 2024, and you want to learn how to properly reset the service light, then all yo…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos