Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 108
    4. : How to reset the service light on a Peugeot 108.

Peugeot 108 - Video tutorial

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Instrument cluster
Operation: How to reset the service light on a Peugeot 108.

If we have performed the oil and filter replacement on this car model, in the text below we will find all the instructions and procedure to follow to reset the service light that will have turned on on the dashboard. To do this, we can also take a look at the images in the video. Once we have accessed the car cabin and sat in the driver's seat, we must press and hold the button located at the bottom right of the dashboard and immediately turn on the dashboard. Then a countdown will appear on the display, at the end of which it will be possible to release the button and then turn off the dashboard.


Posted on 30 May 2023 by ScegliAuto

    Frequently Asked Questions

    • 108 2014-2021 - What to do when the low tire pressure warning light on the Peugeot 108 comes on? Read Answer
    • 108 2014-2021 - What does "TRC off" mean on the Peugeot 108? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos