Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Peugeot 108?

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

Video tutorial

To reset the tyre pressure light on a Peugeot 108, first inflate the car's tyres until they reach the correct pressure value: once the tyres are inflated, proceed to the interior and turn on the ignition with the key. At this point, open the glove compartment located on the passenger side, then press the SET button found inside; this will completely clear the Service light, and you can turn off the ignition.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure indicator on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The following instructions will allow us to reset the tire pressure warning light of the Peugeot 108; before resetting the TPMS sensors, it is necess…
How do you reset the tire pressure light on the Peugeot 108?
How do you reset the tire pressure light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) It will be possible to reset the tire pressure light of the Peugeot 108 by inflating the tires to the corresponding pressure value: once the inflatio…
How do you reset the tire pressure light on the Peugeot 108?
How do you reset the tire pressure light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To make the tire pressure warning light disappear from the instrument panel of the Peugeot 108, you will first need to go and inflate the tires, brin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos