Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Panel of a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance

To remove the rear panel of a Peugeot 206, lift the rear seat and lower the backrest of the rear seats so that the panel clips are visible. Once these clips are detached, you can lever at the bottom of the rear panel to remove it from its housing. After the seatbelt has also been moved, you can position the new panel, securing it properly: once the panel is fixed, reposition the backrest and the rear seat.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Bulb of a Peugeot 206
How to Replace the Rear Bulb of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, open the tailgate of the boot of your Peugeot 206. Begin by unclipping and removing the clips that secure the side carpet. This will…
How to Replace the Rear Bulb of a Peugeot 206
How to Replace the Rear Bulb of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you start, open the tailgate of your Peugeot 206. Begin by unclipping and removing the hooks that secure the side carpet of the boot, which wi…
How do you replace the rear light bulb of a Peugeot 206?
How do you replace the rear light bulb of a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) You can replace the rear headlight bulb of the Peugeot 206 by opening the rear hatch to access the components inside the trunk. On its side, you will…

    Frequently Asked Questions

    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos